If you plan on taking a road trip this summer, just be sure to follow these safety tips.

Safety tips for taking a summer drive

Summer’s here – the season that poses the perfect opportunity for a road trip. It’s time to pack your bags, throw on your sunglasses and fill up the gas tank en route to the beach. But while you might be trying to leave the worries of life behind, you still need to take precautionary measures before getting on the highway.

It’s common to assume winter is the most dangerous season, due to its harsh weather and poor driving conditions. But it turns out that summer has it beat, and that’s because of its high levels of traffic and congested roadways. According to the Insurance Institute for Highway Safety and Highway Loss Data Institute, the number of motor vehicle crash deaths that occurred in summer 2014 amounted to 8,796, while the number was only 7,248 in winter.

If you plan to hit the road during the summer driving season, just be sure to follow these safety tips:

1. Check your tires
Do you want to stay safe and save money while you’re on the road? Then The Huffington Post suggested checking your tires before you take off. Tires that are well-maintained can keep you from experiencing a potential breakdown, all while improving your handling and fuel efficiency. Make sure the air pressure levels in your tires always follow the manufacturer’s recommendation – this can actually increase your fuel efficiency by one mile per gallon! Just be cautious and take your car to the auto shop. The maintenance workers can take a look at your tires and let you know if they’re good to go.

Make sure the air pressure levels in your tires matches the manufacturer's suggestion.Make sure the air pressure levels in your tires match the manufacturer’s suggestion.

2. Pack the car accordingly
You might be inclined to take your entire wardrobe on the trip, but you need to keep your limited space in mind. Your friends and family need some of the cargo room, too! Packing too much could be bad for your car  – exceeding the payload capacity can cause the cabin to drop and ultimately damage your vehicle. If you think you’ve overdone it with the luggage, consider weighing your bags and then check the owner’s manual for information on maximum weight your vehicle can carry.

3. Stay focused on the road
Once you’ve buckled up, put the key in the ignition and set the radio station, make sure you’re staying completely focused on the road. For starters, the California Office of Traffic Safety suggested staying off your phone – even hands free – while you’re driving, both talking and texting. If you need to make an important call or send an urgent message, wait until you reach a rest stop.

“Take stops along the route.”

If you’re starting to feel tired while driving, ask one of the other passengers to take a shift. This can help you avoid fatigue and reduce your risk of falling asleep at the wheel. Also, make sure you have time set aside to take frequent stops along the route. This gives everyone the chance to get up and stretch while your mind takes a break from focusing on the road.

4. Watch out for road hazards and construction zones
Between potholes created in the winter and construction projects preparing to fix them, you’re bound to run into a few hazards while you’re on the road. Just make certain you’re keeping a watchful eye out for construction zones, and always obey the signs. Almost every state increases fines for speeding or violating other traffic laws while driving through construction zones, according to the Governors Highway Safety Association, so be cautious! After all, who wants to receive a ticket on their way to the beach?

5. Keep motorcyclists in mind
During the summer, you’ll notice more motorcyclists on the road, especially traveling on the highway. Unfortunately, the Motorcycle Safety Foundation reported that over half of all fatal motorcycle crashes involve another vehicle, and the cyclist is almost never at fault. While driving to your vacation destination this summer, be especially cautious around choppers. Check your rearview mirrors carefully when changing lanes, and always be mindful when following a cyclist. Allow more distance behind the motorcycle than you normally would with a car just in case you’re in a situation that leads to slamming on your breaks.

Always leave plenty of space when trailing behind motorcyclists.Always leave plenty of space when trailing behind motorcyclists.

6. Keep your children entertained
You might think your smartphone is your biggest distraction on the road, but your children can actually be 12 times more distracting, according to The Travelers Indemnity Company. To stay safe in the car, create entertaining diversions for your kids. Bring snacks, books and portable game consoles to keep them occupied while you drive to your destination.

7. Always buckle up
Sure, your passengers might complain that the seatbelt is uncomfortable during your long trip, but that’s no excuse to stop wearing it. As the driver, it’s crucial to make certain that everyone in the car is always buckled up while the vehicle is in motion – yourself included. Almost every state has at least a secondary law that requires seat belt use, so make sure everyone’s wearing it! It doesn’t only keep you from getting a ticket, it can also save your life.

Does your car need a tune up before you hit the road? Head to NJ Auto Auction, where one of our maintenance workers can give your car the care it deserves.

How good are alternate sources of heat on your car?- I

HEater Vents

It is good to know that car heater alternatives do not exist. No solution can be cheaper than repairing a broken heater core and then installing it. A car heater of 12 volts remains the only viable solution. If you prefer the comforts of a heated car without fixing the problem, the only actual solution is purchasing a substitute car heater. The same will function in the same way as the factory installed heater once used to. This could mean cutting into the cooling system.

The hot engine coolant is the most problematic of car heater alternatives. It is a heat source behind the factory heating systems and it is also free. As hot coolant is simply byproduct of standard engine operation, with the heat must be shed through a regulator, there is no extra energy other than the minuscule amount needed to run the blower motor.

A majority of the car heater alternatives turn out to be electric. These heaters can suck enormous quantities of power. Any driver with a portable car heater can painfully attest to this. Truth be told, a hair dryer is more powerful than an average electric car heater. It follows that the solution to the broken car heater- to be more specific, bad heater core, cannot be an electric heater. Apart from repairing the car heater, the only solution is to buy a replacement car heater. Want the best accessories? Drive down to New Jersey State Auto Auction and choose the best among them.

#NJSAA

#NJStateAuto

#NJStateAutoAuction

New Jersey State Auto Auction

406 Sip Avenue

Jersey City, New Jersey 07306

Phone: 201.355.4138

Website: www.NJStateAuto.com

 

 

How good are alternate sources of heat on your car?- I

HEater Vents

It is good to know that car heater alternatives do not exist. No solution can be cheaper than repairing a broken heater core and then installing it. A car heater of 12 volts remains the only viable solution. If you prefer the comforts of a heated car without fixing the problem, the only actual solution is purchasing a substitute car heater. The same will function in the same way as the factory installed heater once used to. This could mean cutting into the cooling system.

The hot engine coolant is the most problematic of car heater alternatives. It is a heat source behind the factory heating systems and it is also free. As hot coolant is simply byproduct of standard engine operation, with the heat must be shed through a regulator, there is no extra energy other than the minuscule amount needed to run the blower motor.

A majority of the car heater alternatives turn out to be electric. These heaters can suck enormous quantities of power. Any driver with a portable car heater can painfully attest to this. Truth be told, a hair dryer is more powerful than an average electric car heater. It follows that the solution to the broken car heater- to be more specific, bad heater core, cannot be an electric heater. Apart from repairing the car heater, the only solution is to buy a replacement car heater. Want the best accessories? Drive down to New Jersey State Auto Auction and choose the best among them.

#NJSAA

#NJStateAuto

#NJStateAutoAuction

New Jersey State Auto Auction

406 Sip Avenue

Jersey City, New Jersey 07306

Phone: 201.355.4138

Website: www.NJStateAuto.com

 

 

Don't take the same old boring road trip as last year. Try one of these routes!

6 road trip destinations to consider

There's nothing like packing the car with your closest friends and heading out on a road trip. It's an opportunity to travel somewhere new and create memories in the process. But in order to make the most of your travels, you'll want to plan an itinerary that takes you to the best stops along your route. MarketWatch explained that a great scenic pathway consists of breathtaking views of water, mountains and other natural features, so you'll want to plan accordingly.

Here are a few road trip destinations you should consider this summer:

1. Overseas Highway, Florida
Florida is a great summer vacation spot for so many reasons. Besides the gorgeous weather, there's an abundance of blue water you can enjoy for miles and miles. If you take Route 1 from Key Largo to Key West, you'll soon find yourself traveling through Islamorada on a bridge that's surrounded by a beautiful turquoise sea. CNN reported that the Overseas Highway is an entry to incredible secluded islands and historic shipwrecks – making it a great destination for sight-seeing tourists.

2. Pacific Coast Highway
If you'd rather head out West for your road trip, consider the scenic route of the Pacific Coast Highway. From Santa Barbara, California to the Canadian border, the whirlwind of twists and turns along the cliffs will make for an unforgettable experience itself. National Geographic stated that this designated "All-American Road" is among the nation's most scenic routes that you simply can't pass up. Besides the many mountains plunging into the Pacific, you'll pass through villages, meadows and canyons, so you can enjoy plenty of Mother Nature's beautiful offerings. 

3. Route 66
For those who don't know what Route 66 is, you deserve a road trip, because you've obviously been living under a rock. This famous 2,451-mile stretch is one of America's most historic highways, which runs from Chicago, Illinois and ends in Santa Monica, California. A road trip on Route 66 poses so many sight-seeing opportunities as well as pit stop destinations along the drive. The Guardian points out Cadillac Ranch in Texas, just west of Amarillo, which displays incredible artwork made out of graffiti-coated Cadillacs. And you can't forget about the Grand Canyon, which is known for its overwhelming natural scenery that makes it one of the most distinguishable landmarks of the West.

This famous route is one of America's most historic.This famous route is one of America's most historic.

4. Mount Washington Auto Road, New Hampshire
If you're looking for a rustic, woodsy route to travel, consider climbing Mount Washington's Auto Road in New Hampshire. Usually, getting to the top of peak requires a back-packing adventure on foot. However, this trip allows you to sit back in the comfort of your car, making quite the unique experience. The constantly changing weather is always altering the famous mountain, which amounts to the rare sights you'll see each time you travel uphill. Mount Washington Auto Road's official site offers its famous "This Car Climbed Mount Washington" bumper sticker, so you can show off your accomplishment well after your adventure.

5. Acadia All American Road, Maine
For winding roads that take you through Maine's North-central coast, consider driving along the Acadia All American Road for your trip. En route, you'll see granite peaks, fishing villages and forests along the coastline, which could potentially inspire you to pull over and hit the trails for a hike. But that's not all you can enjoy – the Travel Channel insists stopping at Galyn's in Bar Harbor for a serving of fresh and local seafood. Besides, what's a trip to Maine without treating yourself to some lobster?

6. Tail of the Dragon – Tennessee/North Carolina
While road trip courses are often chosen for the scenery, this route isn't quite the same. MarketWatch reported that the Tail of the Dragon at Deals Gap is most famous for its difficulty and excitement. The journey itself is only 11 miles, but it's not boring whatsoever. Most people travel here for the sharp curves and thrills – so if you choose this destination, just be sure you're driving cautiously the entire time – this definitely isn't a laid back, typical road trip by any means.

Before you head out on your summer road trip, you'll have to make sure your car is up-to-date on maintenance services. There's no need to stress about getting the job done on your own, just head to NJ Auto Auction and we'll take care of it for you! Our maintenance guys will make sure your car is in top shape to drive along whichever route you choose.

A Simple Explanation of How A Transmission System Works – Part III of III

Transmission Operation Diagram

Double-clutch

Double-clutching was a common clutch mechanism in older automobiles and is used in some race cars even today. Initially, you push the clutch pedal and de-couple the engine and the transmission. The collar, thus, goes into neutral because there is no pressure on the dog teeth. When you take your foot off the pedal, the engine is connected to ensure you have the right speed. To engage the dog teeth, the next gear and the collar have to rotate at the same speed. When this is achieved, you push the pedal again and lock the collar to a new gear. This process of pushing the clutch twice at every gear change is called double-clutching.

Synchronizer

Modern transmissions eliminate the need for double-clutching by using synchronizers. A synchronizer enables frictional contact of the collar and gear before engaging the dog teeth. Thus, the speed is synchronized before the dog teeth make contact voiding the double-clutch.

Manual transmissions are simple, cost-effective, lightweight, and more efficient than the automatic. But the automatic transmission allows you to have a hassle-free drive without having to worry about changing gears. The communication between the numerous components is what drives the transmission system. It is remarkable how a few simple twists and draws can put your vehicle into motion and control its speed.

The design and implementation of transmissions vary from one manufacturer to another. The overall mechanism, however, remains the same.

For more details, talk to the experts at the New Jersey State Auto Auction.

 

#NJSAA

#NJStateAuto

#NJStateAutoAuction

New Jersey State Auto Auction

406 Sip Avenue

Jersey City, New Jersey 07306

Phone: 201.355.4138

Website: www.NJStateAuto.com

 

A Simple Explanation of How A Transmission System Works – Part III of III

Transmission Operation Diagram

Double-clutch

Double-clutching was a common clutch mechanism in older automobiles and is used in some race cars even today. Initially, you push the clutch pedal and de-couple the engine and the transmission. The collar, thus, goes into neutral because there is no pressure on the dog teeth. When you take your foot off the pedal, the engine is connected to ensure you have the right speed. To engage the dog teeth, the next gear and the collar have to rotate at the same speed. When this is achieved, you push the pedal again and lock the collar to a new gear. This process of pushing the clutch twice at every gear change is called double-clutching.

Synchronizer

Modern transmissions eliminate the need for double-clutching by using synchronizers. A synchronizer enables frictional contact of the collar and gear before engaging the dog teeth. Thus, the speed is synchronized before the dog teeth make contact voiding the double-clutch.

Manual transmissions are simple, cost-effective, lightweight, and more efficient than the automatic. But the automatic transmission allows you to have a hassle-free drive without having to worry about changing gears. The communication between the numerous components is what drives the transmission system. It is remarkable how a few simple twists and draws can put your vehicle into motion and control its speed.

The design and implementation of transmissions vary from one manufacturer to another. The overall mechanism, however, remains the same.

For more details, talk to the experts at the New Jersey State Auto Auction.

 

#NJSAA

#NJStateAuto

#NJStateAutoAuction

New Jersey State Auto Auction

406 Sip Avenue

Jersey City, New Jersey 07306

Phone: 201.355.4138

Website: www.NJStateAuto.com

 

A Simple Explanation of How A Transmission System Works – Part II of III

Transmission Operation Diagram

The most common transmission you see in cars today is the 5-speed. 4-speed models are also available but the 5-speed remains ever popular. The components of the transmission are similar to the 2-speed transmission you’ve seen with additional gears and shafts to complement the speed.

The transmission consists of 5 speed gears and a reverse gear. The shift lever controls three forks which are held together by three rods and engage the mechanism. A rotation point on the center of the lever allows you to handle the gears. The knob on the lever acts opposite to the motion of the corresponding rod and fork. For example, when you want to apply the first gear you move the knob forward. This enables the rod and fork for the first gear to be pulled back.

Different forks and their collars are engaged when you move the shifter either right or left. The collar will engage a gear in case the shifter is moved forward and backward.

The reverse gear, as the name suggests, is applied when you are backing the vehicle. The gear which handles it is called an idler gear. It remains true to its function even in design. It is turned in the opposite direction of other gears. This is done to ensure the gear is impossible to apply if the vehicle is in a forward motion. In the off chance, you do engage the reverse gear, the dog teeth wouldn’t. Instead, you are treated to a lot of noise which indicates the error of your gear switch.

For a more in depth look, talk to the experts at New Jersey State Auto Auction.

#NJSAA

#NJStateAuto

#NJStateAutoAuction

New Jersey State Auto Auction

406 Sip Avenue

Jersey City, New Jersey 07306

Phone: 201.355.4138

Website: www.NJStateAuto.com

 

 

A Simple Explanation of How A Transmission System Works – Part II of III

Transmission Operation Diagram

The most common transmission you see in cars today is the 5-speed. 4-speed models are also available but the 5-speed remains ever popular. The components of the transmission are similar to the 2-speed transmission you’ve seen with additional gears and shafts to complement the speed.

The transmission consists of 5 speed gears and a reverse gear. The shift lever controls three forks which are held together by three rods and engage the mechanism. A rotation point on the center of the lever allows you to handle the gears. The knob on the lever acts opposite to the motion of the corresponding rod and fork. For example, when you want to apply the first gear you move the knob forward. This enables the rod and fork for the first gear to be pulled back.

Different forks and their collars are engaged when you move the shifter either right or left. The collar will engage a gear in case the shifter is moved forward and backward.

The reverse gear, as the name suggests, is applied when you are backing the vehicle. The gear which handles it is called an idler gear. It remains true to its function even in design. It is turned in the opposite direction of other gears. This is done to ensure the gear is impossible to apply if the vehicle is in a forward motion. In the off chance, you do engage the reverse gear, the dog teeth wouldn’t. Instead, you are treated to a lot of noise which indicates the error of your gear switch.

For a more in depth look, talk to the experts at New Jersey State Auto Auction.

#NJSAA

#NJStateAuto

#NJStateAutoAuction

New Jersey State Auto Auction

406 Sip Avenue

Jersey City, New Jersey 07306

Phone: 201.355.4138

Website: www.NJStateAuto.com

 

 

A Simple Explanation of How A Transmission System Works – Part I of III

Transmission Operation Diagram

Now that you are familiar with the different shafts in the transmission, here are the other components which complete its design.

  • Gears: The gears are toothed wheels which are used to change the relation between the speeds of the engine and the wheels. The driver can select any one of the gears to control the speed of the vehicle. These gears are placed on bearings allowing them to spin on the shafts. They are not attached to the splined shaft. In case the car is in motion with the engine turned off, the shaft is the only part which moves whereas the gear and layshaft remain stationary.
  • Collar: The collar is used to attach the splined shaft to one of the two available gears. The splines connect it to the shaft and enable it to spin along with the shaft. The collar is quite mobile and can slide to either side in order to connect the gears.
  • Dog teeth: These are grooves on the collar which can easily lock onto the holes of the gears and engage them in order to power the vehicle.
  • Gear selector fork: The gears on the shift lever are connected to the collar through a gear selector fork. When you select any one of the gears, you move the dog teeth slide in and out of mesh.

2-speed transmission engines are a rarity with 5-speed versions becoming the norm. However, the components remain the same with an additional two or three gears and a more complex model of the transmission.

To know more, get in touch with the experts at New Jersey State Auto Auction.

#NJSAA

#NJStateAuto

#NJStateAutoAuction

New Jersey State Auto Auction

406 Sip Avenue

Jersey City, New Jersey 07306

Phone: 201.355.4138

Website: www.NJStateAuto.com

 

 

A Simple Explanation of How A Transmission System Works – Part I of III

Transmission Operation Diagram

Now that you are familiar with the different shafts in the transmission, here are the other components which complete its design.

  • Gears: The gears are toothed wheels which are used to change the relation between the speeds of the engine and the wheels. The driver can select any one of the gears to control the speed of the vehicle. These gears are placed on bearings allowing them to spin on the shafts. They are not attached to the splined shaft. In case the car is in motion with the engine turned off, the shaft is the only part which moves whereas the gear and layshaft remain stationary.
  • Collar: The collar is used to attach the splined shaft to one of the two available gears. The splines connect it to the shaft and enable it to spin along with the shaft. The collar is quite mobile and can slide to either side in order to connect the gears.
  • Dog teeth: These are grooves on the collar which can easily lock onto the holes of the gears and engage them in order to power the vehicle.
  • Gear selector fork: The gears on the shift lever are connected to the collar through a gear selector fork. When you select any one of the gears, you move the dog teeth slide in and out of mesh.

2-speed transmission engines are a rarity with 5-speed versions becoming the norm. However, the components remain the same with an additional two or three gears and a more complex model of the transmission.

To know more, get in touch with the experts at New Jersey State Auto Auction.

#NJSAA

#NJStateAuto

#NJStateAutoAuction

New Jersey State Auto Auction

406 Sip Avenue

Jersey City, New Jersey 07306

Phone: 201.355.4138

Website: www.NJStateAuto.com